AC Input:
VOLTAGE: 90~264V, (Active PFC / Full Range)
FREQUENCY: 47~63Hz
Acitve Power factor: >0.9
INPUT CURRENT: 14A for 115Vac max.,7A for 230 Vac max.
INRUSH CURRENT: 75A/150A MAX FOR 115/230

DC Output:

OUTPUT VOLTAGE	OUTPUT CURRENT		REGULATION		OUTPUT
	MIN(A)	MAX(A)	LOAD	LINE	RIPPLE & NOISE MAX.[P-P]
+5V	0.2	35	±5%	±1%	60mV
+12V1	2	16	±5%	±1%	120mV
+12V2	0	16	±5%	±1%	120mV
+12V3	0	16	±5%	±1%	120mV
+12V4	0	16	±5%	±1%	120mV
-5V	0	0.8	±10%	±1%	120mV
-12V	0	1	±10%	±1%	120mV
+3.3V	0.5	30	±5%	±1%	60mV
+5VSB	0	3	±5%	±1%	60mV

The combined output power +5V&+3.3V max. Current:48A;+12V1~V4 max,Current:72A
The combined output power +5V&+12V&+3.3V maximum output 980W
The total power shall not exceed 1000W.

> Dimension: D220 X W150 X H86mm
> Cooling: By forced air 2x80mm Fan
> Temperature range: Operation 0˚C~50˚C
> Hold up time: 16ms at maximum load & normal input voltage
> Efficiency: 76% Typical(Normal Line)
> ATX 12V / EPS 12V
> Power good signal: Should be asserted high to indicate that+5VDC and 3.3VDC output
   are above the low voltage thresholds. Compatible signal out with 100ms to 500ms.
> Over power protection: The power supply shall shout down output power exceeds 130% to 160%
> Over voltage protection: Standard on +5V, set at 6.25VDC±0.75VDC
> Short circuit protection: A short circuit placed between the DC return and the output shall
   cause no damage and the power supply shall shutdown.
> EMI: FCC part 15, subpart B, Class B, EN55022 CISPR22 Class B.
> Meet EN-61000-3-2 CLASS D (Active PFC)
> Agency approvals: UL60950, CAN/CSA22.2 No.60950, TUV(IEC60950)
> Remote On/Off control: when ps-on is pulled to TTL low,The DC output is to be Enabled,
   When ps-on is pulled to TTL high, The DC output is to disable