AC Input:
> Watt: 650W
> Input Voltage: 115~230V.
> Efficiency: 75% (min.) at full load(typical) and 115Vac input.
> Power Factor: >0.9
> Input Current: 115Vac / 8.0A max. 200Vac / 4.0A max
> Inrush Current: 55A max. when AC input 115Vac at 25˚C cold start.
110A max. when AC input 230Vac at 25˚C cold start.
> Input Frequency: 47Hz~63 Hz.
> Leakage Current: 3.5mA max.

DC Output:

Output	Voltage	Regulation	Min .Load	Max .Load	Ripple
V1	+5V	+5,-4%	2.0A	28.0A	50mV
V2	+3.3V	+5,-3%	0.5A	30.0A	50mV
V3	+12V1	+5,-4%	1.0A	18.0A	120mV
V4	+12V2	+5,-4%	1.0A	18.0A	120mV
V5	+12V3	+5,-4%	1.0A	18.0A	120mV
V6	+12V4	+5,-4%	1.0A	18.0A	120mV
V7	-12V	+9,-5%	0.0A	0.8A	120mV
V8	+5Vsb	+5,-3%	0.0A	3.0A	50mV

Note:
• The continuous total output power is 650W max.
• The combined power of +5V and +3.3V is 180W max.
• Total combined +12V output load not exceed 52A

> Dimension: WxLxH= 150x140x86mm 80mm FAN x1
> ATX 12V / EPS 12V
> 650W 8 Output, AC Active PSH Input design
> Active Power Factor Correction (PF>0.99) and high efficiency
> Meet IEC-1000-3-2 CLASS D
> Operating temperature range from 10˚C to 40˚C
> Build in DC remote ON/OFF ,TTL-High/PS-OFF, TTL-Low/PS-ON
> Compiles with FCC Class B,CISPR 22 Class B,
BSMI Class B, CE and CCC requirements
> UL/cUL 60950, TUV EN 60950 and CB IEC950 Certified
> MTBF: 100kHrs Minimum.

20+4 Pin	Peripheral	FDD	4+4Pin	6+2Pin	SATA
X 1	X 7	X 1	X 1	X 2	X 2