Electrical specifications
• Input range : 90 - 264VAC
• Frequency : 47 - 63Hz
• Inrush current : < 50A peak @230VAC cold start @25°C
• Input current (rms) : 2.0A @115VAC; 0.75A @230VAC max.
• Efficiency : > 65% typical @full load, 115VAC
• Maximum output power (Po) : 60 Watts convection cooling
• Hold-up time : > 10ms typical @full load, 115VAC
• Short circuit protection : Auto-recovery
• Over load protection : 110% to 160% maximum rating, Auto-recovery
• Over voltage protection : Auto-recovery
• Adjustment range : ±5%
Safety standards
• TUV EN 60950-1:2001.
• UL 60950-1.
EMC standards
• CISPR22 Class B.
• EN 55022 Class B.
• CE.
Environmental
• Operating temperature : 0 to +60°C (Derate linearly 2.5% per °C from 41 to 60°C)
• Storage temperature : -10°C to +70°C
• Humidity: Non-condensing 10% to 95%
• MTBF : > 80,000 hours @full load and 25°C ambient temperature
Matching connectors
• AC input CON1 = molex P/N: 09-65-2029 (or equivalent) female housing molex P/N: 09-76-1020 (or equivalent).
• DC output CON4 = molex P/N: 09-65-2068 (or equivalent) female housing molex P/N: 09-52-4064 (or equivalent).
• Remote sense CON3 = molex P/N: 22-27-2021 (or equivalent) female housing molex P/N: 22-01-2025 (or equivalent).
Description
• Dimension : L127 × W76.5 × H45 mm ( 5" × 3" × 1.77" )
• Weight : 0.36 kgs. ( 0.79 lbs. )
DC OUTPUT & FEATURES
| Model No. |
Output Voltage |
Minimum Load |
Maximum Load
with Convection Cooling |
Po (Max.) |
O/P Regulation |
Ripple &
Noise(Vp-p) |
| EJ-SCT601 |
+V1 |
+5V |
0.3A |
3A |
60W |
±5% |
50mV |
| +V2 |
+3.3V |
0.7A |
7A |
±5% |
50mV |
| +V3 |
+12V |
0.1A |
2A |
±8% |
120mV |
| EJ-SCT62 |
+V1 |
+12V |
0.3A |
3A |
60W |
±8% |
120mV |
| +V2 |
+5V |
0.7A |
7A |
±5% |
50mV |
| -V3 |
-12V |
0.1A |
0.7A |
±10% |
120mV |
| EJ-SCT63 |
+V1 |
+15V |
0.3A |
2.8A |
60W |
±8% |
120mV |
| +V2 |
+5V |
0.7A |
7A |
±5% |
50mV |
| -V3 |
-15V |
0.1A |
0.7A |
±10% |
120mV |
| EJ-SCT64 |
+V1 |
+12V |
0.3A |
3A |
60W |
±8% |
120mV |
| +V2 |
+5V |
0.7A |
7A |
±5% |
50mV |
| -V3 |
-5V |
0.1A |
0.7A |
±10% |
50mV |
| EJ-SCT65 |
+V1 |
+24V |
0.1A |
1.5A |
60W |
±8% |
150mV |
| +V2 |
+5V |
0.7A |
7A |
±5% |
50mV |
| +V3 |
+12V |
0.1A |
0.7A |
±10% |
150mV |
| EJ-SCT66 |
+V1 |
+24V |
0.1A |
1.5A |
60W |
±8% |
240mV |
| +V2 |
+5V |
0.7A |
7A |
±5% |
50mV |
| -V3 |
-12V |
0.1A |
0.7A |
±10% |
120mV |
| EJ-SCT67 |
+V1 |
+24V |
0.1A |
1.5A |
60W |
±8% |
240mV |
| +V2 |
+5V |
0.7A |
7A |
±5% |
50mV |
| -V3 |
+12V |
0.1A |
0.7A |
±10% |
120mV |
Note:
1. Ripple and noise are measured at oscilloscope 20MHz bandwidth by a 10uF electrolytic capacitor and a 0.1uF ceramic capacitor in parallel at output connector.
2. All outputs power load should not exceed 60W, minimum loads are required.
80+ High Efficiency
