> AC Input:
- Input Voltage: 100~240VAC,±10%
- Input Current: 26A For 115VAC, 10A For 230VAC
- Input Frequency: 47Hz ~ 63Hz
- Power Factor: >0.96@230VAC/50Hz,full load

Output Voltage	Output Current			Regulation		Output Ripple & Noise Max.(p-p)
	TC-2000RVN4
	Min.		Max.	LOAD	LINE
+5V	4A		91A	5%	1%	50mV
+3.3V	4A		70A	5%	1%	50mV
+12V	6A		145A	5%	1%	70mV
-12V	0A		2A	5%	1%	70mV
+5VSB	0.4A		3.5A	5%	1%	50mV
Efficiency		72% Typical at full load
HoldupTime		16m sec. minimum, at full load
REMARKS:		1.Total Max output of +5V AND +3.3V not exceed 580W
		2.Power module Total output power not exceed 2000W for TC-2000RVN4.
		3.Noise bandwidth is from DC to 20MHz.

- Universal AC input/Full range
- Active power factor Correct ion
- Protections: Over Power/Over Voltage/Short Circuits
- Cur rent Sharing design on +3.3V, +5V and +12V
- Front panel LED to Indicate Power Status
- Power Fault Alarm Signals
- Alarm Reset
- 100% burn- in test
- ATX 12V / EPS 12V

Protections
Over Power: 110%~150% rated output power
Over Voltage: +5V-›5.7V~6.5V,+3.3V-›3.7V~4.1V,+12V-›12.8V~13.9V
Short Circuit: Shut down o/p voltage, re-power on to recover

Function
Power Good Signal: 100ms~500ms, TTL compatible signal
Power Fail Delay: >1msec., TTL compatible signal
PS-ON: Power off:PS-ON=2V min.; Power on:PS-ON=0.8V max.

Environmental
Operating Temperature: 0˚C to 45˚C
Storage Temperature: -20˚C to +70˚C
Operating Humidity: 20% to 90%,non-condensing
Storage Humidity: 5% to 95%, non-condensing

Safety & EMI/RFI
Safety Standards: UL,cUL,TUV,CB
EMI/RFI Standards: CISPR22(EN55022) Class A, FCC Part15 Class A
Harmonic: EN61000-3-2

Others
MTBF: 100,000 hours
Coolings: 38x38x28mmx8 DC FANS
Dimension(DxWxH): 300x101x166mm

24 Pin	P4 MB	Peripheral	FDD	8-Pin	6-Pin	SATA
X 1	X 1	X 32	X 2	X 1	X 4	X 2