> AC Input:
- VOLTAGE: 100～240V, (Active PFC)
- FREQUENCY: 47～63Hz
- INPUT CURRENT: 8A
- INRUSH CURRENT: 65A/125A MAX FOR 115/230
OUTPUT
VOLTAGE |
OUTPUT CURRENT
|
REGULATION |
OUTPUT |
MIN(A) |
MAX(A) |
LOAD |
LINE |
RIPPLE & NOISE
MAX.[P-P] |
+5V
|
3 |
30 |
±5% |
±1% |
50mV |
+12V1
|
1
|
14 |
±5% |
±1% |
120mV |
+12V2
|
1
|
14 |
±5% |
±1% |
120mV |
-5V
|
0.1 |
0.8 |
±10% |
±1% |
150mV |
-12V
|
0.1 |
1 |
±10% |
±1% |
150mV |
+3.3V
|
1 |
30 |
±5% |
±1% |
50mV |
+5VSB
|
0.1 |
2 |
±5% |
±1% |
50mV |
The combined output power +5V&+3.3V shall not exceed 30A.
The combined output power +5V & +12V & +3.3V maximum output 440W.
The total power shall not exceed 460W.
> DIMENSION: D140 X W150 X H86mm
> COOLING: By forced air 1x80mm Fan
> TEMPERATURE RANGE: Operation 0˚C～50˚C
> HOLD UP TIME: 16ms at maximum load&normal input voltage
> EFFICIENCY: 68％ TYPICAL(Normal Line)
> ATX 12V / EPS 12V
> POWER GOOD SIGNAL: Should be asserted high to indicate that+5VDC and +3.3VDC
output are above the low voltage thresholds. Compatible signal out with 100ms to 500ms.
> OVER POWER PROTECTION: The power supply shall shout down output power exceeds 130％ to 160％
> OVER VOLTAGE PROTECTION: Standard on +5.0V, set at 6.25VDC ± 0.75VDC
> SHORT CIRCUIT PROTECTION: A short circuit placed between the DC return and
the output shall cause no damage and the power supply shall shutdown.
> EMI: FCC part 15, subpart B, Class B, EN55022 CISPR22 Class B.
> Meet EN-61000-3-2 CLASS D ( Active PFC )
> AGENCY APPROVALS: UL60950, CAN/CSA22.2 No.60950, TUV(IEC60950)
> REMOTE ON/OFF CONTROL: When PS-ON is pulled to TTL Low, the DC output
is to be enabled, When PS-OFF is pulled to TTL high, the DC output is to disabled. |
80+ High Efficiency
