|
|
|
You are here: Home > Rackmount > Riser Card |
| |
|
| |
| Model |
Image |
|
Specifications |
|
|
1U 32bit |
|
|
- One PCI Expansion Slot for 1U Rackmount Chassis
- (GH-141ATX) and (GHI104)
|
|
1U 32bitR |
|
|
- Ribbon Cable length is 2.5".
- It can reach the C or D slot on a M/B.
- Please see the picture below for reference.
|
|
1U 64bit |
|
|
- Only for M/B's that has a 64-bit PCI slot in position B.
- If your M/B does NOT have 64-bit PCI slot in position B but it does in position C, then you may need to use a 64-bit Riser with Ribbon Cable.
- Please see the picture below for reference.
|
|
1U 64bitR |
|
|
- Only for M/B's that has a 64-bit PCI slot in position C, D, or E.
- Cable length is 2.75".
- Please see the picture below for reference.
|
|
1U AGP |
|
|
- This 1U AGP 4X/8X Riser Card comes with one "extender" and can be used in most 1U and 2U cases (A or B position slot on M/B) after the holding bracket is removed.
- If you are using a B position AGP slot on your M/B, you will not need the AGP extender.
Please see the picture below for reference.
|
|
2U 32bit |
|
|
- Length: 5.25"
- Only for M/B's that has 3 x 32-bit PCI slots in positions B, C, and D.
- If your M/B does NOT have a 32-bit PCI slot in position B, but it does in position C, then you may need to use a 32-bit Riser Card with Ribbon Cable.
- Please see the picture below for reference.
|
|
2U 32bitR |
|
|
- Card length: 7.25"
- Cable length: 1.5"
|
|
2U 64bitR |
|
|
- Card length: 7"
- Cable length: 3"
- Only for M/B's that has 3 x 64-bit PCI slots in position B, C, and F (E and F are not indicated in the picture).
- This Riser Card is PCI-X 133MHz READY.
- Please see the picture below for reference.
|
|
2U AGP |
|
|
- This Riser (w/ 3" Ribbon Cable) comes with 8X AGP and 2 x 64-bit PCI slots, good for Intel SE7505VB2, Supermicro X5DA8/E M/B, etc..
- Your M/B must have 8X AGP slot in position B and 2 x 64-bit slots in positions E and F to accommodate this Combo Riser.
- Please see the picture below for reference.
|
|
|
|
