Server & Storage Solution Riser Card from Dynapower USA

Left_CSS

You are here: Home > Product > Server & Storage Solution > Riser Card

Dynapower USA's Riser Card refers to a circuit board that plugs into the Motherboard, and contains one of several slots to be used in low-profile, space-saving enclosures. It enables you to connect one or several Full-Size add-on cards to the 1U or 2U system in an parallel orientation to the Motherboard, to provide the utmost system flexibility and extra functions for those small footprint systems. With mainstream PCI, PCI-X, AGP, and PCI-Express 1.0 and 2.0 connectors available, you can add literally every Add-on Card on the market with no compromise, from lightning-speed Graphic Cards, to crystal-clear audio cards, or extra RAID controller cards. When there is extreme limits on card placement, Dynapower USA can also give various lengths of ribbon cable options to extend the flexibility and possibilities.

Select Category

• all

Model

Image

Specifications

1U 32bit

● One PCI Expansion Slot for 1U Rackmount Chassis
● (GH-141ATX) and (GHI104)

1U 32bitR

● Ribbon Cable length is 2.5".
● It can reach the C or D slot on a M/B.
● Please see the picture below for reference.

1U 64bit

● Only for M/B's that has a 64-bit PCI slot in position B.
● If your M/B does NOT have 64-bit PCI slot in position B but it does in position C, then you may need to use a 64-bit Riser with Ribbon Cable.
● Please see the picture below for reference.

1U 64bitR

● Only for M/B's that has a 64-bit PCI slot in position C, D, or E.
● Cable length is 2.75".
● Please see the picture below for reference.

1U AGP

● This 1U AGP 4X/8X Riser Card comes with one "extender" and can be used in most 1U and 2U cases (A or B position slot on M/B) after the holding bracket is removed.
● If you are using a B position AGP slot on your M/B, you will not need the AGP extender.
● Please see the picture below for reference.

2U 32bit

● Length: 5.25"
● Only for M/B's that has 3 x 32-bit PCI slots in positions B, C, and D.
● If your M/B does NOT have a 32-bit PCI slot in position B, but it does in position C, then you may need to use a 32-bit Riser Card with Ribbon Cable.
● Please see the picture below for reference.

2U 32bitR

● Card length: 7.25"
● Cable length: 1.5"

2U 64bit

● 3-64Bit 3.3V PCI Slot for 2U Rackmount Chassis
● Download PCI 301-64 Riser Card Detection Software for DOS

2U 64bitR

● Card length: 7"
● Cable length: 3"
● Only for M/B's that has 3 x 64-bit PCI slots in position B, C, and F (E and F are not indicated in the picture).
● This Riser Card is PCI-X 133MHz READY.
● Please see the picture below for reference.

2U AGP

● This Riser (w/ 3" Ribbon Cable) comes with 8X AGP and 2 x 64-bit PCI slots, good for Intel SE7505VB2, Supermicro X5DA8/E M/B, etc..
● Your M/B must have 8X AGP slot in position B and 2 x 64-bit slots in positions E and F to accommodate this Combo Riser.
● Please see the picture below for reference.