Features

  • E.O.L. (End of Life) as of 1/30/19 
  • Replaced by SS-1U40ES
  • 350W
  • Dimensions(mm): 190 x 100 x 40.5
  • Application: For Industry Use
  • ATX 12V / EPS 12V
  • PFC: Active
  • 80 PLUS
  • High efficiency

1U Power Supply 80Plus 350W TC-1U35P80 Product Description

The 1U Power Supply 80Plus 350W TC-1U35P80 is the perfect upgrade or replacement for powering an AMD or Intel based server. Ideal for 2U or 3U server cases, this 2U power supply provides your system with a 80 Plus certified power solution, as well as protection against over load, over voltage and over current situations – the perfect solution for delivering stable power to the most demanding devices. The 350W power supply also comes with a built-in, ball-bearing fan that helps provide superior air flow, ensuring optimum operating temperatures for long-lasting performance.

INPUT SPECIFICATIONS
Input voltage: 90 ~ 264 VAC
Input frequency: 47 ~ 63 Hz

PROTECTIONS
Over voltage protection
Short circuit protection

GENERAL SPECIFICATIONS
Hold-up time: 16 msec (minimum) at 80% of full load at 115Vac input.
Efficiency: 80% (min.) at 20%,50%,100% loading line input
MTBF: 100,000 hours

ENVIRONMENTAL SPECIFICATIONS
Operating temperature
: 0˚C to +50˚C
Storage temperature: -20˚C to +80˚C
Relative humidity: 95% non-condensing

DC OUTPUTS

OUTPUT VOLTAGE OUTPUT CURRENT REGULATION OUTPUT
MIN ( A ) MIN ( A ) LOAD LINE RIPPLE & NOISE
MAX. [P-P]
+5V 0.5 18 ±5% ±1% 50mV
+12V1 1 16 ±5% ±1% 120mV
+12V2 1 16 ±5% ±1% 120mV
-5V 0 0.3 ±10% ±1% 100mV
-12V 0 0.8 ±10% ±1% 120mV
+3.3V 0.5 16 ±5% ±1% 50mV
+5VSB 0 2.5 ±5% ±1% 50mV

 

(1) The +12V1 and +12V2 total output shall not exceed 24A.
(2) The +3.3V and +5V total output shall not exceed 130watts.
(3) total output for this subject power supply is 350 watts.
(4) Ripply and noise measurements shall be made under all specified load conditions through a single pole low pass filter with 20MHz cutoff frequency. Outputs shall bypassed at the connector with a 0.1uF ceramic disk capacitor and a 10uF electrolytic capacitor to simulate system loading.

Connectors:

20-4
SATA
FDD
peripheralx3
8-Pin
20+4 Pin SATA
FDD Peripheral 4+4 Pin
X 1 X 2 X 1 X 3 X 1