FEATURES

  • Active PFC
  • Universal AC input
  • ATX 12V/ EPS 12V
  • MTBF = 100,000 hours

 

TC-1000PL 1000W PS2 Power Supply Product Description

TC-1000PL 1000W PS2 Power Supply are industrial graded ATX switching power supplies from 350W to 1000W and are designed to fit perfectly into your tower case, server case, and 4U compact rackmount chassis. This series features thermal fan speed control, Active PFC, and triple circuit protection. The state-of-the-art power design with cutting edge Japanese capacitors and solid-state capacitors make our PS/2 series the ideal solution for your home or enterprise PCs, IPCs, servers, workstations, and storage systems.

AC Input

  • Input voltage: 100~240V, (Active PFC, Full Range)
  • Input frequency: 47 to 63 Hz
  • Input current: 14A
  • Inrush current: 65A/125A MAX FOR 115/230

General Specifications

  • Hold-up time: 16ms at maximum load & normal input voltage
  • Efficiency: 70% TYPICAL(Normal Line)
  • MTBF: 100,000 hours

Environmental Specifications

  • Operating temperature: 0˚C to +50˚C
  • Storage temperature: -20˚C to +80˚C
  • Relative humidity: 95% non-condensing

Others

  • DIMENSION: L220 X W150 X H86 mm
  • COOLING: By forced air 2x80mm Fan
  • ATX 12V / EPS 12V
  • POWER GOOD SIGNAL: Should be asserted high to indicate that+5VDC and +3.3VDC output are above the low voltage thresholds. Compatible signal out with 100ms to 500ms.
  • OVER POWER PROTECTION: The power supply shall shout down output power  exceeds 130% to 160%
  • OVER VOLTAGE PROTECTION: Standard on +5.0V, set at 6.25VDC ± 0.75VDC
  • SHORT CIRCUIT PROTECTION: A short circuit placed between the DC return and the output shall cause no damage and the power supply shall shutdown.
  • EMI: FCC part 15, subpart B, Class B, EN55022 CISPR22 Class B.
  • AGENCY APPROVALS: UL60950, CAN/CSA22.2 No.60950, TUV(IEC60950)
  • MEET EN-61000-3-2 CLASS D (ACTIVE PFC)
  • REMOTE ON/OFF CONTROL: When PS-ON is pulled to TTL Low, the DC output is to be enabled, When PS-OFF is pulled to TTL high, the DC output is to disabled.

AC Output

OUTPUT
VOLTAGE
OUTPUT CURRENT
REGULATION
OUTPUT
MIN(A)
MAX(A)
LOAD
LINE
RIPPLE & NOISE
MAX.[P-P]
+5V0.235±5%±1%60mV
+12V1216±5%±1%120mV
+12V2016±5%±1%120mV
+12V3016±5%±1%120mV
+12V4016±5%±1%120mV
-5V00.8±10%±1%120mV
-12V01±10%±1%120mV
+3.3V0.530±5%±1%60mV
+5VSB03±5%±1%60mV

 

The combined output power +5V&+3.3V shall not exceed 64A.
The combined output power +5V & +12V & +3.3V maximum output 980W.
The total power shall not exceed 1000W.

20 + 4 pin
P4 MB
peripheral
FDD
8-Pin
SATA
20+4 Pin P4 MB PeripheralFDD8-PinSATA
X 1X 1X 6X 1X 1X 2