Showing 13–17 of 17 results

EP-50X.4368-RM 500W ATX PS2 Switching Power Supply

FEATURES

  • Complied with ATX12V standard
  • High efficiency and reliability, low noise and ripple
  • Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances).
  • Remote ON/OFF function
  • Internal 12V DC fan included
  • Output over voltage, short circuit, and over current protection
  • 100% Hi-pot, ATE, and burn-in tested

FEATURES

  • Complied with ATX12V standard
  • High efficiency and reliability, low noise and ripple
  • Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances).
  • Remote ON/OFF function
  • Internal 12V DC fan included
  • Output over voltage, short circuit, and over current protection
  • 100% Hi-pot, ATE, and burn-in tested

EP-50075 500W ATX PS2 Switching Power Supply

FEATURES

  • 500W 6 Output, AC Input design
  • Operating temperature range from  0˚C to  50˚C
  • Build in DC remote ON/OFF , PG/PF TTL signal
  • Build in a 8cm+8cm Sleeve fan
  • Compiles with FCC Class B,CISPR Pub. 22,
  • EN55022 Class B, and CE requirements

FEATURES

  • 500W 6 Output, AC Input design
  • Operating temperature range from  0˚C to  50˚C
  • Build in DC remote ON/OFF , PG/PF TTL signal
  • Build in a 8cm+8cm Sleeve fan
  • Compiles with FCC Class B,CISPR Pub. 22,
  • EN55022 Class B, and CE requirements

EP-50X.C866 PS2 500W Power Supply

Features

  • 500W
  • 6 Output, AC Input design
  • Operating temperature range from  0˚C to  50˚C
  • Build in DC remote ON/OFF , PG/PF TTL signal
  • Build in a 8cm+8cm Sleeve fan
  • 1 years manufacturer warranty
  • 20 + 4 Pins Motherboard Connectors
  • 2 x SATA

Features

  • 500W
  • 6 Output, AC Input design
  • Operating temperature range from  0˚C to  50˚C
  • Build in DC remote ON/OFF , PG/PF TTL signal
  • Build in a 8cm+8cm Sleeve fan
  • 1 years manufacturer warranty
  • 20 + 4 Pins Motherboard Connectors
  • 2 x SATA

EP-500 PS2 500W Power Supply

Features

  • 500W
  • 6 Output, AC Input design
  • Operating temperature range from  0˚C to  50˚C
  • Build in DC remote ON/OFF , PG/PF TTL signal
  • Build in a 8cm+8cm Sleeve fan
  • MTBF: 100kHrs Minimum.
  • 1 years manufacturer warranty
  • 20 + 4 Pins Motherboard Connectors
  • 2 x SATA

Features

  • 500W
  • 6 Output, AC Input design
  • Operating temperature range from  0˚C to  50˚C
  • Build in DC remote ON/OFF , PG/PF TTL signal
  • Build in a 8cm+8cm Sleeve fan
  • MTBF: 100kHrs Minimum.
  • 1 years manufacturer warranty
  • 20 + 4 Pins Motherboard Connectors
  • 2 x SATA

EP-430 PS2 430W Power Supply

Features

  • Dimensions: 5.9″ x 3.4″ x 5.5″
  • Dimensions(mm): 150 x 86 x 140
  • Power Good Signal: Power on delay time 100ms to 500 ms, off delay 1ms minimum
  • Temperature Range: Operating  -10˚C ~ +40˚C on full load; Storage and Shipping -20˚C ~ +70˚C
  • Humidity: 90% on operating and 95% on storage
  • Efficiency: 65% at minimum measured at nominal AC main Voltage and frequency with maximum load on all output
  • Rise Time: Less than 20ms
  • Hold-up Time: 16ms minimum at 115V/60Hz; 20ms minimum at 230V/50Hz input voltage
  • Leakage Current: Less than 3.5mA
  • MTBF: 50,000 hours on maximum load at +25˚C

Features

  • Dimensions: 5.9″ x 3.4″ x 5.5″
  • Dimensions(mm): 150 x 86 x 140
  • Power Good Signal: Power on delay time 100ms to 500 ms, off delay 1ms minimum
  • Temperature Range: Operating  -10˚C ~ +40˚C on full load; Storage and Shipping -20˚C ~ +70˚C
  • Humidity: 90% on operating and 95% on storage
  • Efficiency: 65% at minimum measured at nominal AC main Voltage and frequency with maximum load on all output
  • Rise Time: Less than 20ms
  • Hold-up Time: 16ms minimum at 115V/60Hz; 20ms minimum at 230V/50Hz input voltage
  • Leakage Current: Less than 3.5mA
  • MTBF: 50,000 hours on maximum load at +25˚C